Process Safety Resources & News | Fauske & Associates

Combustible Dust Testing

Laboratory testing to quantify dust explosion and reactivity hazards

Safety Data Sheets

Develop critical safety data for inclusion in SDS documents

Gas and Vapor

Laboratory testing to quantify explosion hazards for vapor and gas mixtures

UN-DOT

Classification of hazardous materials subject to shipping and storage regulations

Hydrogen

Testing and consulting on the explosion risks associated with devices and processes which use or produce hydrogen

Safety Data Sheets

Develop critical safety data for inclusion in SDS documents

Thermal Stability

Safe storage or processing requires an understanding of the possible hazards associated with sensitivity to variations in temperature

Adiabatic Calorimetry

Data demonstrate the consequences of process upsets, such as failed equipment or improper procedures, and guide mitigation strategies including Emergency Relief System (ERS) design

Reaction Calorimetry

Data yield heat and gas removal requirements to control the desired process chemistry

Battery Safety

Testing to support safe design of batteries and electrical power backup facilities particularly to satisfy UL9540a ed.4

Safety Data Sheets

Develop critical safety data for inclusion in SDS documents

Cable Testing

Evaluate electrical cables to demonstrate reliability and identify defects or degradation

Equipment Qualification (EQ)

Testing and analysis to ensure that critical equipment will operate under adverse environmental conditions

Water Hammer

Analysis and testing to identify and prevent unwanted hydraulic pressure transients in process piping

Acoustic Vibration

Identify and eliminate potential sources of unwanted vibration in piping and structural systems

Gas & Air Intrusion

Analysis and testing to identify and prevent intrusion of gas or air in piping systems

ISO Accreditation and Scope

Fauske & Associates fulfills the requirements of ISO/IEC 17025:2017 in the field ofTesting

Dust Hazards Analysis

Evaluate your process to identify combustible dust hazards and perform dust explosion testing

On-Site Risk Management

On-site safety studies can help identify explosibility and chemical reaction hazards so that appropriate testing, simulations, or calculations are identified to support safe scale up

DIERS Methodology

Design emergency pressure relief systems to mitigate the consequences of unwanted chemical reactivity and account for two-phase flow using the right tools and methods

Deflagrations (Dust/Vapor/Gas)

Properly size pressure relief vents to protect your processes from dust, vapor, and gas explosions

Effluent Handling

Pressure relief sizing is just the first step and it is critical to safely handle the effluent discharge from an overpressure event

Biological

Model transport of airborne virus aerosols to guide safe operations and ventilation upgrades

Radioactive

Model transport of contamination for source term and leak path factor analysis

Fire Analysis

Model transport of heat and smoke for fire analysis

Flammable or Toxic Gas

Model transport of flammable or toxic gas during a process upset

Mechanical, Piping, and Electrical

Engineering and testing to support safe plant operations and develop solutions to problems in heat transfer, fluid, flow, and electric power systems

Hydrogen Safety

Testing and consulting on the explosion risks associated with devices and processes which use or produce hydrogen

Thermal Hydraulics

Testing and analysis to ensure that critical equipment will operate under adverse environmental conditions

Nuclear Safety

Our Nuclear Services Group is recognized for comprehensive evaluations to help commercial nuclear power plants operate efficiently and stay compliant

Radioactive Waste

Safety analysis to underpin decomissioning process at facilities which have produced or used radioactive nuclear materials

Adiabatic Safety Calorimeters (ARSST and VSP2)

Low thermal inertial adiabatic calorimeters specially designed to provide directly scalable data that are critical to safe process design

Other Lab Equipment and Parts for the DSC/ARC/ARSST/VSP2 Calorimeters

Products and equipment for the process safety or process development laboratory

FERST

Software for emergency relief system design to ensure safe processing of reactive chemicals, including consideration of two-phase flow and runaway chemical reactions

FATE

Facility modeling software mechanistically tracks transport of heat, gasses, vapors, and aerosols for safety analysis of multi-room facilities